Dtf Pet Film Heat Transfer Direct to Film Printing for T Shirts

Product Description

This is a new and advanced item we developed execlusively for Inkjet digital printing
with textile pigment ink for EPSON PRINT HEAD!
New Tecnique For Textile Printing, Completely Automatic Printing, High Efficency, Time Saving, Materials Saving!
The easiest way to do heat transfer printing on garments: Inkjet digital printing, the image come out from computer to your T-shirt!
Anything you can print, you can get the finished sticker in just a few minutes time!
You want to save your time, save your cost on heat transfer printing? I have a tip for you!
Please contact with me,  Phoebe Liao


INKJET PRITNING PAPER WATER BASE INK PRINTING FOR HEAT TRANSFER/THERMAL TRANSFER ON TEXTILE PRINTABLE PET FILM WASHABLE LABEL ON GARMENT

APPLICATION
 

• Printing types: digital printing, inkjet priting, image printing
• Release type: cold release 
• Matt Degree: Super matt
• Image type: decoration label, main label etc
• Printing inks: water based ink,hotmelt glue/adhesive, hotmelt powder
• Printing Equipment: Digital printing machine, HP printer, Epson, OKI, Xerox etc
• Applicable heat transfer materials: cottons, chemical fiber, cotton blend fabrics, EVA, non-woven fabrics, leather, and other heat resistant fabrics.

PARAMETERS:

• Thickness:  75um, 100um;
• Size information: 50cm width or 60cm width, 100meter per roll;
• Heat transfer temperature: 150 degrees or depending on the melting point of adhesives or hot melt powders used;
• Heat transfer time: 12 seconds

OUR OUTSTANDING POINTS:

1. Use top quality base film, highly heat stabilized, minimum shrinkage, 180C, 1 minutes heat, shrink 2 to 3mm(75micron thickness), 1mm shrink for 100micron thickenss
2. Excellent printing result, we have special coating to make maximum ink absord on the film;
3. Scratch resistance, coating material will not easy scratch off the film, after transfer, coating will not transfer to the fabric;
4. Excellent printing result, we make special coating material to help to maximum ink absord, ink fastness is good after transfer;
5. Professional and experience sales guide, we can provide printing technical support, we can help to solve the problems happens during the printing process;
6. OEKO TEX certified, Appendix 4, class II.
7. Strict quality control system, before every shipment, we tested size stablized after condition of 180C, 1 min; release figure, coating eveness, matt degree, simple printing test or follow customer request.

SPECIFICATION:
 

PROPERTY	Unit	Method	Value 75u
Substance	g/m2	internal	108-109
Caliper	um	internal	75±2
Coating weight	g/m2	internal	10.0±1
Tensile strength(md)	Mpa	ASTM D 882	> 150
Tensile strength(td)	MPa	ASTM D 882	> 150
Elongation at break(md)	%	ASTM D 882	> 80
Elongation at break(td)	%	ASTM D 882	> 70
Matt degree	%	ASTM D 882	<15
Release figure	N	internal	3-4
Shrinkage(md) (180ºC*1minutes)	%	ASTM D 1204	< 0.5
Shrinkage(td) (150ºC*30minutes)	%	ASTM D 1204	< 0.5
SURFACE RESISTIVITY (antistatic side)		ASTM D 257	< 10^7

PRINTING INTRUCTION:




Check the amazing printing we had made!